|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||
|
 |
This
skid steering based "Lunchbot - 1" was built from 4 Easy
Rollers, a Motor Mind C, and the Motor Mind C Carrier Board. |
 |
 |
Juan Pablo Angulo from Mexico
City built the "Biway" 2 wheeled balancing robot using the MMC as the
motor controller |
|
 |
A
robot from Remo Campopiano's "artbot" Waterbugs
Project. |
|
 |
This
drive train for skid steering makes use of 2 ICON Interface Modules and 2 ICON H-Bridge. |
|
 |
The
Proteus robot was developed by Robotic Sciences and is a commercial
robot (photo courtesy of Robotic
Sciences, Inc.) |
|
 |
"Lunchbot
- 2" improves on the earlier version with working headlights,
front and rear spoilers, and an MMC rev4. |
|
 |
The
V-Maid makes use of the Motor Mind B and was developed by Clint Bridges. |
|
 |
This
image was sent to us by a beta test applicant. The gun was going to
be activated by the ICON H-bridge. |
|
 |
Robot
built by Paul Garcia for application note 701. Uses Motor Mind C in
analog mode for drive control. |
