AFFORDABLE MOTION CONTROL PRODUCTS
MINIATURE ENGINEERING MODULES
Info Part Description Price-1/100 Buy
   
MOTM_2 Motion Mind - 6-24V, 9A cont 25A peak DC motor controller. Analog, serial, button, or R/C control. ASCII, binary, TTL, or RS232 comm. Position, velocity, duty cycle control. Quadrature encoder interface (though not required). 2.4" x 3.6"
$85/$85
MOTMCON Motion Mind Connection Board - Provides simple low cost custome PCB and connectors for testing the Motion Mind
$20/$20
MMC Motor Mind C - 6-24V, 2.25A (per motor) cont 5A peak dual DC motor controller. Controls 1 or 2 DC motors, serial, analog, or R/C control modes. 40pin DIP w/ 0.6" spacing.
$50/$42
MMC_BS2 Carrier board with sockets and connections for the MMC and the popular Parallax BASIC Stamp (24 pin versions)
$40/$35
MMBe  Motor Mind B enhanced - 6-36V, 2.0A cont 6A peak DC motor controller. 21 serial commands, 9pin SIP 1.0"x1.2" module. Serial data 2.4KBPS or 9.6KBPS, 15.5KHz or 242Hz PWM.
$25/$20
SB_1 Simple Bridge - 6-24V, 6A cont 25A peak direct control H-bridge. Over-current, over-temperature, under-voltage protected H-bridge directly controlled with 4 i/o lines. 1.7" x 1.6"
$25/$20
MMBCON Connector for mounting Motor Mind B horizontally on a PCB
$6/$3
MMBSTB Limited Availability: Motor Mind B Serial Test Board for testing mechanical systems with the Motor Mind B
$60/$50
12VACK Fan kit. 12V 6.5CFM fan and mounting hardware for MMC_BS2.
$15/$15
         
Info Part Description
Price-1/100
Buy
 
EZR1_BLUE
Easy Roller robot wheel kit - Blue aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.5" diameter X 1.5" wide foam.
$36/$30
EZR1_BLAK Easy Roller robot wheel kit - Black aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.5" diameter X 1.5" wide foam wheel.
$36/$30
EZR1_SILV Easy Roller robot wheel kit - Silver aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.5" diameter X 1.5" wide foam wheel.
$36/$30
EZR2_BLUE
Easy Roller robot wheel kit - Blue aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.125" diameter X 0.5" wide plastic friction wheel with O-ring
$36/$30
EZR2_BLAK Easy Roller robot wheel kit - Black aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.125" diameter X 0.5" wide plastic friction wheel with O-ring
$36/$30
EZR2_SILV Easy Roller robot wheel kit - Silver aluminum L bracket, motor, wheel, and all mounting hardware for robot drive systems. Wheel is 2.125" diameter X 0.5" wide plastic friction wheel with O-ring
$36/$30
MM1_BLUE EZR Replacement Motor Mount - blue
$10/$10
MM1_BLAK EZR Replacement Motor Mount - black
$10/$10
MM1_SILV EZR Replacement Motor Mount - silver
$10/$10
MOTOR1 EZR Replacement Motor / 4.5-18VDC / 200RPM / 3.6KG-CM / 111mA
$15/$15
WHEEL1 EZR Replacement Wheel 2.5" d iameter X 1.5" wide foam friction wheel
$15/$15
WHEEL2 EZR Replacement Wheel 2.125" d iameter X 0.5" wide plastic friction wheel w/ O-ring
$12/$12
ENC300 Quadrature Encoder for EZR - 300 counts-per-revolution for implementing position control of EZR.
$35/$30
         
Info Part Description
Price-1/100
Buy
 
MEMKEY Keypad Encoder - Converts keypad matrix (up to 4x5 keys) to serial or PC/AT data. Key values, debounce, typematic rate, row/column location are programmable
$28/$24
MEMKIT Limited Availability: Memkey Programmer Kit - everyting you need to program the Memkey with a PC
$199/$135
     
 
  Part Description
Price
Buy
 
  ISPECIAL 1-MOTM2, 1-MOTMCON (normally $105)
$95
  Obsolete out of stock products - Datasheets and software for obsolete products such as the ICON product line can be found at this link.

The new Motion Mind REV2 hardware now comes with an active current limiting function, and serial bootloader firmware for "at-home" upgrades.

We kept the form factor and most functions identical between the Motion Mind 1 and Motion Mind 2. Customers should see very little difference between the products.

Additionally, based on customer input, we have added a Motion Mind Connector Board kit to our stocked parts. This kit should ease connecting and testing the Motion Mind for your application.

PRODUCT PHOTOS, PRICING, DATASHEETS, AND APPLICATION NOTES CAN BE ACCESSED THROUGH THE INFO BUTTON