 |
|
|
 |
 |
|
|
MOTOR
MIND C
|
SINGLE
OR DUAL MOTOR
SPEED CONTROLLER |
| Get | Type | Title | Description |
 |
|||
 |
PDF |
MMC_DS |
Datasheet
and communication protocol for Motor Mind C |
| |
PDF |
MMC_ERRATA |
Known
errors for the various firmware revisions of the Motor Mind C |
|
PDF |
MMC_DS_obsolete |
Obsolete
datasheet and communication protocol for the MMC_REV3 |
| |
PDF |
MMC_CHANGES |
Document
describing differences between the MMC_REV4 and the obsolete MMC_REV3 |
| |
PDF |
MMC_BS2DS(AN700) |
MMC_BS2
datasheet includes text of AN700: Interfacing a Parallax BASIC Stamp™ II
to the Motor Mind C |
| |
ZIP |
AN700 |
files
associated with AN700 |
| |
PDF |
AN701 |
Using
the Motor Mind C Analog Mode by Paul Garcia |
|
PDF |
AN702 |
MMC_BS2
Carrier Board and the BasicMicro ATOM |
|
PDF |
AN703 |
Protecting
the MMC in 24V Systems (good information on protecting the MMC from transients at all voltage levels) |
|
PDF |
AN704 |
Ramping
motors speeds with the Parallax BASIC Stamp™ |
|
ZIP |
AN704_source |
Source
code for AN704 |
|
PDF |
AN706 |
Describes interfacing a PIC16F73 to the MMC via the serial interface. Implements a 5 button motor speed controller with fault checking. Example code in ASM and C |
|
ZIP |
AN706_ASM |
Assembly code version of AN706 |
| |
ZIP |
AN706_C |
CCS Compiler C Code version of AN706 |
|
PDF |
12VACK_DS |
Datasheet
and mounting instructions for 12V Active Cooling Kit |
| |
HTM |
ROBOTS |
Photos
of robots built with the MMC |
 |
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
|
| controls 1 or 2 brush DC motors | |
| serial/analog/RC control | |
| up to 2.25A (per motor) 6-24VDC | |
| 40 pin DIP 0.6"wide footprint | |
| 1.2KHz or 19.2KHz PWM (serial only) | |
 |
|
1
to 9 units
|
$50 |
| 10 to 24 units | $48 |
| 25 to 99 units | $46 |
| 100 to 249 units | $42 |
| 250 to 499 units | $40 |
| 500 or more | call for pricing |
 |
Motor
Mind C Carrier Board (MMC_BS2), 12V Active Cooling Kit (12VACK) mounts
to MMC_BS2, Easy Roller Robot Wheel Kit (EZR) |
 |
 |
 |
The Motor
Mind C (MMC) provides control of one or two small brush DC motors.
Motor speed and direction can be controlled up to 2.25A continuous
current
per motor. This module is ideal for controlling small robotic systems. |
||
GET
BUTTON TO THE LEFT OF SELECTION INITIATES DOWNLOAD |